Comments on: Steadicam Pilot BP-U conversion

By: Clayton Burkhart

Clayton Burkhart — Sun, 06 Nov 2011 12:38:05 +0000

Hi, Just wondered if there exists an equivalent adapter to the Dolgin one referenced in this thread for Sony NP-F970 which I run my Marshall off of?

They appear to have similar connection plates, but it is not clear if it is the same or if another power adapter is needed. If so where could I find one?

Cheers,
Clayton

By: Paul Joy

Paul Joy — Wed, 24 Nov 2010 10:32:37 +0000

Thanks for the feedback Steven. Not making any final decisions about investing in an F3 until next year, but yes it’s very likely.

By: Steven

Steven — Wed, 24 Nov 2010 04:33:21 +0000

Hey Paul…
Just to say: THANK YOU… I recently “upgraded” from Glidecam X10 to Pilot and in search for “tips and FAQ” I found your url… Following your idea, I did the same in modifying the sled to Sony EX1 power. I did both cables (power and video) and works like a charm! I was familia with Dolgin adapter from before (got it directly from Dolgin as soon as it was available) but with different plugs. I used that on my HD4000 sled to power the monitor only. Now, I ordered the same as you from B&H and did the mod with proper screws with bolts. All done in 1/2 hour. I custom ordered adapter cables for video and power and the person who made it, did a GREAT JOB. All together, very happy!
Again, thanks for confirming (first) the idea that I had…
P.S. R U getting the F3???

By: Paul Joy

Paul Joy — Mon, 20 Sep 2010 20:28:53 +0000

Canon DSLR’s usually come with an AV lead. One end is a three way mini jack, the other is a standard 3 phono connector (yellow, red, White). Plug the yellow connector into the video input on the pilots stage and you’ll get video to the monitor.

By: Lars

Lars — Mon, 20 Sep 2010 15:26:33 +0000

Hi!
What is canon Av lead?
I am also trying to find out a way to connect Canon 7D to steadicam pilot default monitor. Is there a way to do it that is not to expencive?

thanks in advance!

By: Vincent

Vincent — Fri, 13 Aug 2010 20:59:31 +0000

Hi, Paul got it thank you!!

By: Paul Joy

Paul Joy — Tue, 10 Aug 2010 18:16:21 +0000

Hi Vincent, yes I’ve used DSLR’s on the pilot and just use the canon Av lead .

By: Vincent

Vincent — Tue, 10 Aug 2010 15:03:18 +0000

Hi, Paul:

did you try to put your Canon camera on Steadicam pilot?I have a question is how can I connect video signal from my 7D to Pilot LCD Monitor?coz pilot monitor don’t have HDMI input any idea?

By: Paul Joy

Paul Joy — Mon, 29 Mar 2010 20:55:57 +0000

Yes, exactly as in the images above works great for me.

By: Vincent

Vincent — Mon, 29 Mar 2010 20:48:14 +0000

I’m using NXcam now,I saw your demo picture.you put your EX1 to the end of plate with Miller Plate on Pilot.balance ok?